JPS METAL & ALLOYS/ISO 9001:2015 CERTIFIED/MUMBAI, INDIA
VEDAANT@JPSMETAL.IN/+91 22 66630010
IndustriesContact UsBlogAbout

Blog: Stainless Steel, Alloy & Piping Guides

Practical guides on grades, standards, certificates and exporting from India.

19 Nov 2026 · 6 MIN

CuNi 90/10 vs 70/30 (C70600 vs C71500): Which Copper-Nickel to Specify

Copper-nickel 90/10 (UNS C70600) vs 70/30 (UNS C71500): composition, strength, seawater velocity limits, standards and applications for pipes, tubes and bars.
19 Nov 2026 · 5 MIN

Monel 400 vs Monel K-500: Differences, Properties and Uses

Monel 400 (UNS N04400) vs Monel K-500 (UNS N05500): composition, strength, age hardening, ASTM B164 and B865 bar specifications, and when to use each alloy.
7 Nov 2026 · 4 MIN

PMI Testing Explained: How to Verify Stainless Steel and Alloy Grades

What positive material identification (PMI) is, XRF vs OES methods, what PMI cannot detect and how to specify PMI on stainless steel and nickel alloy ...
6 Nov 2026 · 5 MIN

Best Materials for Seawater Service: Stainless, Duplex, Cupro-Nickel and Titanium

Compare SS 316L, duplex, super duplex, 90/10 and 70/30 cupro-nickel, and titanium for seawater piping, flanges, fasteners and heat exchangers....
4 Nov 2026 · 6 MIN

How to Buy Stainless Steel and Alloys from India: Process, Documents and Incoterms

Step-by-step guide for overseas buyers on importing stainless steel and alloy pipes, flanges, fittings and bars from India: RFQ, documents, HS codes a...
1 Nov 2026 · 4 MIN

Stud Bolts and Nuts: ASTM A193 B7, B8M and A194 2H Explained

Guide to flange stud bolt grades ASTM A193 B7, B7M, B8, B8M and L7 and matching A194 nuts, with coatings and selection advice....
27 Oct 2026 · 4 MIN

EN 10204 Type 3.1 vs 3.2 Mill Test Certificates Explained

What EN 10204 type 2.2, 3.1 and 3.2 certificates mean, what a mill test certificate should contain and how buyers can verify an MTC against the materi...
20 Oct 2026 · 5 MIN

Inconel 625 vs Inconel 718 vs Hastelloy C276: Which Nickel Alloy?

Compare Inconel 625, Inconel 718 and Hastelloy C276 by composition, strength, corrosion resistance and applications to choose the right nickel alloy....
13 Oct 2026 · 4 MIN

Butt Weld vs Socket Weld vs Threaded Pipe Fittings

Compare butt weld (ASME B16.9), socket weld and threaded fittings (ASME B16.11): size range, strength, leak risk and where each type is used....
6 Oct 2026 · 6 MIN

Types of Flanges: Weld Neck, Slip-On, Blind, Threaded, Spectacle and Orifice

A practical guide to the six main flange types, ASME B16.5 pressure classes, facing types and materials, with advice on which flange to use where....
29 Sep 2026 · 4 MIN

How to Read Pipe Schedules: NPS, OD and Wall Thickness Explained

Learn how NPS, outside diameter and schedule numbers work for stainless steel pipe, with an ASME B36.19 wall thickness chart and a pipe weight formula...
22 Sep 2026 · 5 MIN

Seamless vs Welded vs ERW vs EFW Pipes: How to Choose

Understand how seamless, welded, ERW and EFW pipes are made, their size ranges, standards and best uses so you can choose the right pipe for your proj...
15 Sep 2026 · 5 MIN

Duplex 2205 vs Super Duplex 2507: Which One Should You Specify?

Compare duplex 2205 (UNS S32205 / S31803) and super duplex 2507 (UNS S32750): composition, PREN, strength, temperature limits and typical applications...
8 Sep 2026 · 5 MIN

SS 304 vs SS 316: Differences in Composition, Corrosion and Cost

SS 304 vs SS 316 explained: chemical composition, corrosion resistance, strength, cost and how to choose between them for pipes, flanges, bars and fas...