Slip-On Flanges Manufacturer & Exporter in India
Slip-On Flanges in all grades — ASME B16.5 / B16.47, Class 150, 300, 600, 900, 1500, 2500, supplied with full traceability.
Overview
Slip-on flanges that slide over the pipe and are fillet welded inside and out, offering easy alignment and lower cost.
Slip-on flanges slide over the pipe and are fillet welded on the inside and outside, which makes alignment easy and keeps cost lower than weld neck flanges. JPS Metal & Alloys supplies slip-on flanges from 1/2" to 60" NB in Class 150 to 2500 and PN 6 to PN 100, in stainless steel, alloy and carbon steel, duplex, nickel alloys, copper-nickel and titanium, to ASME B16.5 and B16.47.
Slip-on flanges are widely used in process piping, water and utility lines, low-pressure chemical service, marine and offshore piping. They are available with raised face, flat face, hubbed, plate or ring type and RTJ faces, bored to suit the pipe OD.
JPS Metal & Alloys is a Mumbai-based manufacturer-supplier and exporter of Slip-On Flanges in 7 material families: Stainless Steel, Alloy & Carbon Steel, Duplex & Super Duplex, Nickel Alloys, Copper-Nickel, Titanium, Aluminium Alloys. Every consignment ships with heat and batch traceability, and material is checked against the ASME B16.5 / B16.47 specification before dispatch.
We serve oil & gas, chemical processing, marine, hydraulic, valve and pump manufacturing customers in India and overseas, supplying from stock or cut, processed and machined to your requirement.
Types of Slip-On Flanges
Raised Face (RF)
Flat Face (FF)
Hubbed Slip-On
Plate / Ring Type
Ring Type Joint (RTJ)
Key Features & Advantages of Slip-On Flanges
- Sizes 1/2" to 60" NB, Class 150 to 2500 and PN 6 to PN 100
- Raised face, flat face, hubbed, plate and RTJ types
- Forged to ASTM A182 / A105, with EN 10204 3.1 certification
- Serrated or smooth gasket finish as specified
- Marking with size, class, grade, heat number and standard
Specification
| Parameter | Details |
|---|---|
| Standard | ASME B16.5 / B16.47, ASTM A182 / A105, DIN, EN 1092-1, JIS B2220 |
| Size Range | 1/2" to 60" NB |
| Rating / Schedule | Class 150, 300, 600, 900, 1500, 2500; PN 6 to PN 100 |
| End Connection / Finish | RF, FF, RTJ |
| Certification | EN 10204 3.1, PMI and third-party inspection on request |
| Supplied By | JPS Metal & Alloys, Mumbai |
Pressure Rating at Ambient Temperature (ASME B16.5)
| Class | Carbon steel A105 (bar) | SS 304 / F304 (bar) | SS 316 / F316 (bar) |
|---|---|---|---|
| Class 150 | 19.6 | 19.0 | 15.9 |
| Class 300 | 51.1 | 49.6 | 41.4 |
| Class 600 | 102.1 | 99.3 | 82.7 |
| Class 900 | 153.2 | 148.9 | 124.1 |
| Class 1500 | 255.3 | 248.2 | 206.8 |
| Class 2500 | 425.5 | 413.7 | 344.7 |
Maximum working pressure at 38 °C. Ratings reduce as temperature rises, so refer to the temperature-pressure tables in ASME B16.5 for design conditions.
Available Grades & Material Standards
| Material Family | Grades and Standard |
|---|---|
| Stainless Steel | SS 304 / 304LSS 316 / 316LSS 321SS 310 / 310SSS 410SS 420SS 430SS 17-4 PHSS 904LSS 303SS 15-5 PHSS 431 ASTM A182 F304 / F316 / F321 / F347 / F310 |
| Alloy & Carbon Steel | ASTM A105, A350 LF2, A182 F11 / F22 / F91 |
| Duplex & Super Duplex | ASTM A182 F51 / F53 / F55 |
| Nickel Alloys | Inconel 600Inconel 625Inconel 718Incoloy 825Hastelloy C276Monel 400Monel 500Alloy 20Inconel 601Inconel X-750Incoloy 800Incoloy 800HNickel 200Nickel 201Hastelloy C22 ASTM B564 (UNS N06600 / N06625 / N10276 / N04400 / N08825) |
| Copper-Nickel | ASTM B151 / B122 |
| Titanium | ASTM B381 |
| Aluminium Alloys | ASTM B247 |
How Slip-On Flanges Are Made
Flange blanks are forged from bar or billet, or cut from plate for plate-type flanges, then heat treated, machined to size, drilled and finished. The face is machined with a serrated or smooth finish to suit the gasket, and the bore is machined to the pipe OD with a clearance for welding.
How to Choose the Right Type
Choose slip-on flanges for low-to-medium pressure, non-cyclic service where cost and ease of installation matter. For high pressure, high temperature, cyclic loading or hazardous fluids, weld neck flanges are the safer option. State size, class, face type, bore (pipe OD or schedule), grade and standard.
Testing & Inspection
Every lot of Slip-On Flanges is checked before dispatch. Typical tests and inspections include:
- Chemical analysis and PMI against the specified grade
- Dimensional inspection of OD, bolt circle, thickness and face to ASME B16.5 / B16.47
- Dimensional inspection to ASME B16.5, hardness and PMI
- Hardness test and heat treatment records
- Ultrasonic testing, dye penetrant and impact testing on request
- Third-party inspection by an agency of your choice on request
Typical Applications
Packing, Marking & Delivery
Flanges are packed in plywood or wooden cases, with faces protected by cardboard or wood discs to prevent scratching, and each flange is marked with size, class, grade, heat number and standard. Cases are palletised and loaded as FCL or LCL from Nhava Sheva (JNPT), Mumbai.
Documents supplied with each shipment include the EN 10204 3.1 mill test certificate, packing list, commercial invoice and certificate of origin, with third-party inspection on request. Domestic dispatch across India and export shipments are handled with the same documentation.
Looking for Slip-On Flanges in a specific grade, size or quantity? Send us your requirement and we will respond with pricing and lead time.
Request a Quote →Frequently Asked Questions
Related Guides
Guides to help you specify, order and inspect this product.
Related Products
Blind Flanges
Orifice Flanges
Spectacle Flanges
Threaded Flanges
Stud Bolts
Hex Nuts
Services, Grades and Export
Need material cut, treated or finished? We offer custom cutting to size, heat treatment, machined components and forged components. See the full list of material grades, our quality and certification process, and export capabilities.