Flat Bars Manufacturer & Exporter in India
Flat Bars in all grades — ASTM A276 / A479 / A29, Hot rolled, cold drawn, supplied with full traceability.
Overview
Flat bars for brackets, gaskets, baffles, flanges blanks and fabricated parts.
Flat bars are rectangular sections supplied from 3 mm to 100 mm in thickness and 10 mm to 300 mm in width. They are used for brackets, base plates, gasket and flange blanks, baffles, support straps, tooling and general fabrication. JPS Metal & Alloys supplies flat bars in stainless steel, alloy and carbon steel, nickel alloys, aluminium, brass and copper alloys.
Flat bars are available hot rolled, cold drawn bright, slit or sheared from plate, and forged. Slit flat bar is economical for fabrication, whereas cold drawn flat bar offers better dimensional control. Bars can be cut to your lengths and supplied annealed or in the condition required by the standard.
JPS Metal & Alloys is a Mumbai-based manufacturer-supplier and exporter of Flat Bars in 8 material families: Stainless Steel, Alloy & Carbon Steel, Duplex & Super Duplex, Nickel Alloys, Copper-Nickel, Titanium, Aluminium Alloys, Brass. Every consignment ships with heat and batch traceability, and material is checked against the ASTM A276 / A479 / A29 specification before dispatch.
We serve oil & gas, chemical processing, marine, hydraulic, valve and pump manufacturing customers in India and overseas, supplying from stock or cut, processed and machined to your requirement.
Types of Flat Bars
Hot Rolled Flat Bar
Cold Drawn / Bright Flat
Slit / Sheared Flat
Forged Flat
Key Features & Advantages of Flat Bars
- Thickness 3 mm to 100 mm and width 10 mm to 300 mm
- Hot rolled, cold drawn, slit and forged supply
- Suitable for fabrication, machining and gasket blanks
- Cut to length with deburred edges on request
- Traceable with EN 10204 3.1 certification
Specification
| Parameter | Details |
|---|---|
| Standard | ASTM A276 / A479 / A29, EN 10088-3 |
| Size Range | Thickness 3 mm to 100 mm; width 10 mm to 300 mm |
| Rating / Schedule | Hot rolled, cold drawn |
| End Connection / Finish | Black or bright; cut to length |
| Certification | EN 10204 3.1, PMI and third-party inspection on request |
| Supplied By | JPS Metal & Alloys, Mumbai |
Available Grades & Material Standards
| Material Family | Grades and Standard |
|---|---|
| Stainless Steel | SS 304 / 304LSS 316 / 316LSS 321SS 310 / 310SSS 410SS 420SS 430SS 17-4 PHSS 904LSS 303SS 15-5 PHSS 431 ASTM A276 / A479 / A582 |
| Alloy & Carbon Steel | ASTM A29 / A322 / A434, EN8 / EN19 / EN24 (BS 970) |
| Duplex & Super Duplex | ASTM A276 / A479 (S31803 / S32750) |
| Nickel Alloys | Inconel 600Inconel 625Inconel 718Incoloy 825Hastelloy C276Monel 400Monel 500Alloy 20Inconel 601Inconel X-750Incoloy 800Incoloy 800HNickel 200Nickel 201Hastelloy C22 ASTM B166 / B446 / B408 / B574 / B164 / B865 / B160 / B637 |
| Copper-Nickel | ASTM B151 |
| Titanium | ASTM B348 |
| Aluminium Alloys | ASTM B211 |
| Brass | ASTM B16 |
How Flat Bars Are Made
Hot rolled flats are rolled to size from billets and edge trimmed. Cold drawn flats are drawn through rectangular dies for closer size and a bright surface. Slit or sheared flats are cut from coil or plate, which is cost effective and leaves edges that can be deburred on request. Forged flats are produced by open-die forging for heavier sections.
How to Choose the Right Type
Choose cold drawn flats when thickness and width tolerance are important, and slit or hot rolled flats for fabrication where cost matters most. If you are cutting many gasket or flange blanks, plate may be more economical, and our team can compare both. Provide thickness × width × length, grade and finish.
Testing & Inspection
Every lot of Flat Bars is checked before dispatch. Typical tests and inspections include:
- Chemical analysis and positive material identification (PMI) against the specified grade
- Mechanical tests: tensile, yield, elongation and hardness as per the material standard
- Thickness, width and flatness checks
- Dimensional, straightness and surface inspection
- Intergranular corrosion testing (ASTM A262) for stainless grades on request
- Third-party inspection by an agency of your choice on request
Typical Applications
Packing, Marking & Delivery
Bars are bundled and strapped, or packed in wooden cases or HDPE-lined bundles, with end caps and a tag or paint mark showing grade, size and heat number. For export, bundles are palletised or crated with moisture protection, and loaded as FCL or LCL from Nhava Sheva (JNPT), Mumbai.
Documents supplied with each shipment include the EN 10204 3.1 mill test certificate, packing list, commercial invoice and certificate of origin, with third-party inspection on request. Domestic dispatch across India and export shipments are handled with the same documentation.
Looking for Flat Bars in a specific grade, size or quantity? Send us your requirement and we will respond with pricing and lead time.
Request a Quote →Frequently Asked Questions
Related Guides
Guides to help you specify, order and inspect this product.
Related Products
Hex Bars
Hollow Bars
Round Bars
Square Bars
Plates
Pipe Nipples
Services, Grades and Export
Need material cut, treated or finished? We offer custom cutting to size, heat treatment, machined components and forged components. See the full list of material grades, our quality and certification process, and export capabilities.