JPS METAL & ALLOYS/ISO 9001:2015 CERTIFIED/MUMBAI, INDIA
VEDAANT@JPSMETAL.IN/+91 22 66630010
IndustriesContact UsBlogAbout

PMI Testing Explained: How to Verify Stainless Steel and Alloy Grades

What positive material identification (PMI) is, XRF vs OES methods, what PMI cannot detect and how to specify PMI on stainless steel and nickel alloy orders.

By JPS Metal & Alloys · 7 Nov 2026 · 4 min read

Positive material identification (PMI) is a non-destructive test that checks the alloy composition of a part. It is used to confirm that the grade in the box is the grade on the certificate, which matters most for pressure parts, flanges, fasteners and bars.

Two common methods

MethodHow it worksStrengthsLimits
XRF (X-ray fluorescence)Handheld analyser excites the surface and reads emitted X-raysFast, portable, reads Cr, Ni, Mo, Ti, Nb and most alloy elementsCannot measure carbon, so it cannot tell 316 from 316L
OES (optical emission spectroscopy)Spark on the surface, light analysedMeasures carbon and light elementsLeaves a small burn mark, needs a larger instrument

What PMI can and cannot do

  • It confirms alloy family: 304 vs 316, 2205 vs 2507, Inconel 625 vs 718.
  • It cannot confirm carbon content, so low-carbon grades need a lab analysis or the mill certificate.
  • It does not measure mechanical properties such as strength or hardness.

How to specify PMI

  • State the percentage of items to test, for example 100 percent for alloy flanges and fasteners.
  • Specify the elements and tolerance, and the method.
  • Ask for a PMI report with test location, instrument and results for each heat.

JPS Metal & Alloys performs PMI before dispatch and can supply reports with each order.

Need material to a specification? Send your grade, size and quantity.

Request a Quote →