JPS METAL & ALLOYS/ISO 9001:2015 CERTIFIED/MUMBAI, INDIA
VEDAANT@JPSMETAL.IN/+91 22 66630010
IndustriesContact UsBlogAbout

Dome Nuts Manufacturer & Exporter in India

Dome Nuts in all grades — DIN 1587 / 986, A2 / A4 stainless, Class 8, 10, supplied with full traceability.

Overview

Hex nuts with a closed domed top that cover the bolt end for safety, protection and a finished appearance.

Dome nuts, also called cap nuts or acorn nuts, are hex nuts with a closed domed top that cover the bolt end for safety, protection and a finished look. JPS Metal & Alloys supplies high crown, low crown, acorn, thin and blind hole dome nuts from M4 to M48 and 1/4" to 1", to DIN 1587 / 986, ASME B18.2.2 and IS 4590.

Dome nuts protect threads from corrosion and damage, prevent injury from exposed bolt ends, and give a clean look to equipment, furniture, architectural fittings, vehicles and marine hardware. They are available in stainless steel A2 / A4, carbon steel, brass and aluminium.

JPS Metal & Alloys is a Mumbai-based manufacturer-supplier and exporter of Dome Nuts in 8 material families: Stainless Steel, Alloy & Carbon Steel, Duplex & Super Duplex, Nickel Alloys, Copper-Nickel, Titanium, Aluminium Alloys, Brass. Every consignment ships with heat and batch traceability, and material is checked against the DIN 1587 / 986 specification before dispatch.

We serve oil & gas, chemical processing, marine, hydraulic, valve and pump manufacturing customers in India and overseas, supplying from stock or cut, processed and machined to your requirement.

Types of Dome Nuts

TYPE

High Crown Dome Nut

Tall cap for longer bolt ends.
TYPE

Low Crown Dome Nut

Low profile cap.
TYPE

Acorn Nut

Decorative closed nut.
TYPE

Thin Dome Nut

Reduced height.
TYPE

Blind Hole Dome Nut

Closed end that seals the thread.

Key Features & Advantages of Dome Nuts

  • M4 to M48 and 1/4" to 1"
  • High crown, low crown, thin and blind hole types
  • Stainless A2 / A4, carbon steel, brass and aluminium
  • Polished or passivated finish
  • Metric, UNC and UNF threads

Specification

ParameterDetails
StandardDIN 1587 / 986, ASME B18.2.2, IS 4590
Size RangeM4 to M48; 1/4" to 1"
Rating / ScheduleA2 / A4 stainless, Class 8, 10
End Connection / FinishPlain, polished, zinc
CertificationEN 10204 3.1, PMI and third-party inspection on request
Supplied ByJPS Metal & Alloys, Mumbai

Available Grades & Material Standards

How Dome Nuts Are Made

Dome nuts are cold forged and then tapped from the open end. The closed dome is formed during forging and may be polished. Stainless steel nuts are pickled and passivated, and carbon steel nuts are plated or coated.

How to Choose the Right Type

Choose a high crown dome nut where there is a long bolt end to cover, and a low crown or thin dome nut where space is limited. For marine or food use, choose A4 (316) for better corrosion resistance. Check that the bolt does not bottom out inside the dome, and state thread and finish.

Testing & Inspection

Every lot of Dome Nuts is checked before dispatch. Typical tests and inspections include:

  • Chemical analysis and PMI against the specified grade or property class
  • Tensile, yield, proof-load and hardness tests as per the standard
  • Dimensional and thread inspection and finish check
  • Dimensional and thread gauge inspection
  • Impact testing for low-temperature grades and intergranular corrosion testing on request
  • Third-party inspection by an agency of your choice on request

Typical Applications

Covering exposed threadsFurniture & architectureMarine fittingsAppliancesVehicles

Packing, Marking & Delivery

Fasteners are counted or weighed and packed in cartons or wooden cases, with oiled or VCI paper for corrosion protection where needed, and each pack is marked with size, grade, heat or lot number and standard. Cases are palletised and loaded as FCL or LCL from Nhava Sheva (JNPT), Mumbai.

Documents supplied with each shipment include the EN 10204 3.1 mill test certificate, packing list, commercial invoice and certificate of origin, with third-party inspection on request. Domestic dispatch across India and export shipments are handled with the same documentation.

Looking for Dome Nuts in a specific grade, size or quantity? Send us your requirement and we will respond with pricing and lead time.

Request a Quote →

Frequently Asked Questions

What is Dome Nuts used for?
Hex nuts with a closed domed top that cover the bolt end for safety, protection and a finished appearance. Typical applications include covering exposed threads, furniture & architecture, marine fittings, appliances and vehicles.
Which standards do your dome nuts meet?
We supply dome nuts to DIN 1587 / 986, ASME B18.2.2, IS 4590, with material grades verified against the applicable ASTM / ASME specification before dispatch.
What sizes and ratings of dome nuts are available?
Sizes: M4 to M48; 1/4" to 1". Ratings / schedules: A2 / A4 stainless, Class 8, 10. End connections: Plain, polished, zinc. Non-standard sizes can be quoted on request.
Which materials are dome nuts available in?
We supply dome nuts in stainless steel, alloy & carbon steel, duplex & super duplex, nickel alloys, copper-nickel, titanium, aluminium alloys and brass. All grades listed on this page can be quoted with EN 10204 3.1 certification.
Do you export dome nuts?
Yes. We ship from Nhava Sheva (JNPT), Mumbai on Ex-Works, FOB and CIF terms with MTC, certificate of origin, packing list and third-party inspection on request.
What is a dome nut used for?
A dome nut covers the end of a bolt to protect the thread, prevent injury from sharp ends and improve appearance.
What is the difference between a dome nut and an acorn nut?
They are the same product: dome nut, cap nut and acorn nut all refer to a nut with a closed, rounded top. The shapes differ slightly by crown height.
Do dome nuts come in stainless steel?
Yes. Stainless dome nuts are supplied in A2 (304) and A4 (316), and in other grades on request.

Related Guides

Guides to help you specify, order and inspect this product.

Services, Grades and Export

Need material cut, treated or finished? We offer custom cutting to size, heat treatment, machined components and forged components. See the full list of material grades, our quality and certification process, and export capabilities.

Specification

StandardDIN 1587 / 986
SizeM4 to M48
RatingA2 / A4 stainless, Class 8, 10
CertificationEN 10204 3.1
Supplied ByJPS Metal & Alloys

Get a quote for Dome Nuts — grade, size and quantity.

Request a Quote →