JPS METAL & ALLOYS/ISO 9001:2015 CERTIFIED/MUMBAI, INDIA
VEDAANT@JPSMETAL.IN/+91 22 66630010
IndustriesContact UsBlogAbout

SS 310 / 310S Manufacturer, Supplier & Exporter in India

Composition, mechanical properties, international equivalents and available forms for SS 310 / 310S.

Overview

The high chromium and nickel content of 310 gives strong oxidation resistance, with continuous use up to about 1035 °C and intermittent use to about 1150 °C, well beyond standard 304 or 316.

SS 310 / 310S (UNS S31000, W.Nr. 1.4845) round bars, hollow bars, flat and hex bars, sheets, plates, seamless and welded pipes, pipe fittings, flanges and fasteners are available from stock or to order from our Mumbai warehouse. As an SS 310 / 310S supplier and exporter in India, we supply with EN 10204 3.1 mill test certificates and ship to the GCC, Europe, Southeast Asia and the USA.

SS 310 and 310S contain 25% chromium and 20% nickel. This composition gives excellent oxidation resistance at high temperature and good strength, and 310S, with lower carbon, is preferred for welded parts.

Key Properties of SS 310 / 310S

  • Resists oxidation up to about 1035 °C continuous and 1150 °C intermittent
  • Good creep strength and carburisation resistance
  • 310S low-carbon grade is preferred for welded parts
  • Less suited to sulphur-rich gases at high temperature

International Equivalents

StandardDesignation
DIN / W.Nr.1.4841 / 1.4845
JISSUS310S
ENX8CrNi25-21 / X15CrNiSi25-21
ASTM / UNSASTM A276, UNS S31000 / S31008

Chemical Composition

ElementRange
Cr24.0–26.0%
Ni19.0–22.0%
C0.25% max (0.08% max for 310S)
FeBalance

Mechanical Properties

PropertyValue
Tensile Strength515 MPa min
Yield Strength205 MPa min
Elongation40% min

Fabrication & Heat Treatment

Weld with 310 filler; low heat input limits hot cracking. It work hardens, so machine with sharp tools and steady feeds.

Typical Applications

Furnace componentsHigh-temperature process equipmentHeat treatment fixtures

SS 310 / 310S Available In

SS 310 / 310S is supplied from stock or to order in the product forms below. Select a product to see sizes, standards and types.

Sheets & Plates

Frequently Asked Questions

What forms of SS 310 / 310S do you supply?
We supply SS 310 / 310S as round bars, sheets, plates, pipes and tubes, forged and butt weld fittings, flanges and fasteners, cut to size and heat treated on request.
What certification comes with SS 310 / 310S?
Every consignment carries an EN 10204 3.1 mill test certificate checked against ASTM A276, UNS S31000 / S31008. PMI and third-party inspection can be arranged.
What is the difference between 310 and 310S?
310S has a lower carbon limit (0.08% against 0.25%), which improves weldability and resistance to sensitisation.
When should I choose 310 over 304 or 321?
Choose 310 when temperatures exceed about 870 °C, where 304 and 321 lose scaling resistance.

Related Guides

Practical guides for specifying and inspecting SS 310 / 310S.

Related Grades

Compare SS 310 / 310S with other Stainless Steel grades, or browse the full list of grades. Material can be cut to size, heat treated and machined.

Specification

StandardASTM A276
UNSS31000 / S31008
FamilyStainless Steel
CertificationEN 10204 3.1
Supplied ByJPS Metal & Alloys

Get a quote for SS 310 / 310S: form, size and quantity.

Request a Quote →