JPS METAL & ALLOYS/ISO 9001:2015 CERTIFIED/MUMBAI, INDIA
VEDAANT@JPSMETAL.IN/+91 22 66630010
IndustriesContact UsBlogAbout

Stud Bolts Manufacturer & Exporter in India

Stud Bolts in all grades — ASTM A193 B7 / B7M / B8 / B8M / B16, Class 1 / Class 2, supplied with full traceability.

Overview

Fully threaded rods with a nut at each end, the standard fastener for flange and pressure-vessel joints.

Stud bolts are fully threaded or double-ended rods that carry a nut at each end, and are the standard fastener for flanged and pressure-containing joints. JPS Metal & Alloys supplies stud bolts from M6 to M100 and 1/4" to 4" to ASTM A193 B7 / B7M / B8 / B8M / B16, A320 L7 and ASME B18.31.2, in carbon, alloy, stainless, duplex and nickel alloy grades.

Fully threaded studs, double end studs, tap end studs and threaded rod (allthread) are available, plain or coated with PTFE or Xylan for corrosion protection and consistent torque. They are used on refinery flanges, valves, pumps, pressure vessels and heat exchangers.

JPS Metal & Alloys is a Mumbai-based manufacturer-supplier and exporter of Stud Bolts in 8 material families: Stainless Steel, Alloy & Carbon Steel, Duplex & Super Duplex, Nickel Alloys, Copper-Nickel, Titanium, Aluminium Alloys, Brass. Every consignment ships with heat and batch traceability, and material is checked against the ASTM A193 B7 / B7M / B8 / B8M / B16 specification before dispatch.

We serve oil & gas, chemical processing, marine, hydraulic, valve and pump manufacturing customers in India and overseas, supplying from stock or cut, processed and machined to your requirement.

Types of Stud Bolts

TYPE

Fully Threaded Stud

Threaded along the whole length.
TYPE

Double End Stud

Threads at both ends with plain centre.
TYPE

Tap End Stud

One end threaded for tapped holes.
TYPE

Threaded Rod / Allthread

Long lengths cut to size.
TYPE

PTFE / Xylan Coated

Coatings for corrosion and low friction.

Key Features & Advantages of Stud Bolts

  • M6 to M100 and 1/4" to 4", lengths to order
  • ASTM A193 B7 / B7M / B8 / B8M / B16 and A320 L7
  • Fully threaded, double end, tap end and allthread
  • PTFE and Xylan coated options
  • Matched A194 nut sets available

Specification

ParameterDetails
StandardASTM A193 B7 / B7M / B8 / B8M / B16, ASTM A320 L7, ASME B18.31.2
Size RangeM6 to M100; 1/4" to 4"
Rating / ScheduleClass 1 / Class 2; B7, B16, L7, B8M
End Connection / FinishPlain, PTFE, Xylan, hot dip galvanised
CertificationEN 10204 3.1, PMI and third-party inspection on request
Supplied ByJPS Metal & Alloys, Mumbai

Bolting Grade Reference

Bolt / Nut PairingMaterialMin Tensile (MPa)Min Yield (MPa)Typical Use
ASTM A193 B7 / A194 2HChromium-molybdenum alloy steel860725General high-temperature and flange bolting
ASTM A193 B7M / A194 2HMChromium-molybdenum, controlled hardness690550Sour (H2S) service per NACE MR0175
ASTM A193 B8 / A194 8Stainless steel 304, Class 1515205Corrosion resistance, food and general chemical
ASTM A193 B8M / A194 8MStainless steel 316, Class 1515205Chloride and marine service
ASTM A193 B16 / A194 4 or 7Chromium-molybdenum-vanadium860725High-temperature steam and turbine service
ASTM A320 L7 / A194 4 or 7Chromium-molybdenum, impact tested860725Low-temperature service

Minimum strength values are for diameters up to 2-1/2 inch as listed in the ASTM specifications. Please confirm requirements against the current standard.

Available Grades & Material Standards

How Stud Bolts Are Made

Studs are cut from bar, then the threads are rolled or cut to the class of fit (typically 2A) and the studs are heat treated to the grade. Coatings such as PTFE, Xylan, zinc or cadmium are applied after threading, and each batch is marked with the grade and the manufacturer.

How to Choose the Right Type

Use B7 for general high-temperature flange bolting, B7M for sour (NACE) service, B8 / B8M for corrosion resistance, B16 for high-temperature steam, and L7 for low-temperature service. Use matching nuts: 2H with B7, 2HM with B7M, 8 / 8M with B8 / B8M, and 4 or 7 with B16 and L7. State thread, length, grade and coating.

Testing & Inspection

Every lot of Stud Bolts is checked before dispatch. Typical tests and inspections include:

  • Chemical analysis and PMI against the specified grade or property class
  • Tensile, yield, proof-load and hardness tests as per the standard
  • Tensile, yield, hardness and impact tests as per ASTM A193 / A320
  • Dimensional and thread gauge inspection
  • Impact testing for low-temperature grades and intergranular corrosion testing on request
  • Third-party inspection by an agency of your choice on request

Typical Applications

Flange connectionsPressure vesselsValves & pumpsOil & gasPower plants

Packing, Marking & Delivery

Fasteners are counted or weighed and packed in cartons or wooden cases, with oiled or VCI paper for corrosion protection where needed, and each pack is marked with size, grade, heat or lot number and standard. Cases are palletised and loaded as FCL or LCL from Nhava Sheva (JNPT), Mumbai.

Documents supplied with each shipment include the EN 10204 3.1 mill test certificate, packing list, commercial invoice and certificate of origin, with third-party inspection on request. Domestic dispatch across India and export shipments are handled with the same documentation.

Looking for Stud Bolts in a specific grade, size or quantity? Send us your requirement and we will respond with pricing and lead time.

Request a Quote →

Frequently Asked Questions

What is Stud Bolts used for?
Fully threaded rods with a nut at each end, the standard fastener for flange and pressure-vessel joints. Typical applications include flange connections, pressure vessels, valves & pumps, oil & gas and power plants.
Which standards do your stud bolts meet?
We supply stud bolts to ASTM A193 B7 / B7M / B8 / B8M / B16, ASTM A320 L7, ASME B18.31.2, with material grades verified against the applicable ASTM / ASME specification before dispatch.
What sizes and ratings of stud bolts are available?
Sizes: M6 to M100; 1/4" to 4". Ratings / schedules: Class 1 / Class 2; B7, B16, L7, B8M. End connections: Plain, PTFE, Xylan, hot dip galvanised. Non-standard sizes can be quoted on request.
Which materials are stud bolts available in?
We supply stud bolts in stainless steel, alloy & carbon steel, duplex & super duplex, nickel alloys, copper-nickel, titanium, aluminium alloys and brass. All grades listed on this page can be quoted with EN 10204 3.1 certification.
Do you export stud bolts?
Yes. We ship from Nhava Sheva (JNPT), Mumbai on Ex-Works, FOB and CIF terms with MTC, certificate of origin, packing list and third-party inspection on request.
What is the difference between a stud bolt and a hex bolt?
A stud bolt has no head and threads along its full length, with a nut at each end. A hex bolt has a head and is tightened against it.
How is stud bolt length measured?
Stud length is measured from end to end, including threads, whereas a hex bolt is measured under the head.
Which stud bolt grade is used for sour service?
ASTM A193 B7M with A194 2HM nuts is normally used for sour (H2S) service under NACE MR0175 / ISO 15156, because of its controlled hardness.

Related Guides

Guides to help you specify, order and inspect this product.

Services, Grades and Export

Need material cut, treated or finished? We offer custom cutting to size, heat treatment, machined components and forged components. See the full list of material grades, our quality and certification process, and export capabilities.

Specification

StandardASTM A193 B7 / B7M / B8 / B8M / B16
SizeM6 to M100
RatingClass 1 / Class 2
CertificationEN 10204 3.1
Supplied ByJPS Metal & Alloys

Get a quote for Stud Bolts — grade, size and quantity.

Request a Quote →