JPS METAL & ALLOYS/ISO 9001:2015 CERTIFIED/MUMBAI, INDIA
VEDAANT@JPSMETAL.IN/+91 22 66630010
IndustriesContact UsBlogAbout

Aluminium 5052 Manufacturer, Supplier & Exporter in India

Composition, mechanical properties, international equivalents and available forms for Aluminium 5052.

Overview

Better corrosion resistance and formability than 6061, at lower strength.

Aluminium 5052 (UNS A95052) round bars, hollow bars, flat and hex bars, sheets, plates, seamless and welded pipes, pipe fittings, flanges and fasteners are available from stock or to order from our Mumbai warehouse. As an Aluminium 5052 supplier and exporter in India, we supply with EN 10204 3.1 mill test certificates and ship to the GCC, Europe, Southeast Asia and the USA.

5052 is a non-heat-treatable aluminium-magnesium alloy with good formability, weldability and corrosion resistance, used for sheet metal, tanks and marine components.

Key Properties of Aluminium 5052

  • Higher strength than the 1xxx and 3xxx alloys among non-heat-treatable grades
  • Excellent corrosion resistance in marine atmospheres
  • Good formability and weldability
  • Used for sheet metal, fuel tanks and hydraulic tubing

International Equivalents

StandardDesignation
ENAW-5052
DINAlMg2.5
ASTM / UNSASTM B211, UNS A95052

Chemical Composition

ElementRange
Mg2.2–2.8%
Cr0.15–0.35%

Mechanical Properties

PropertyValue
Tensile Strength195–290 MPa
Yield Strength90–255 MPa

Fabrication & Heat Treatment

Weld with 5356 filler; forming is best in H32 or H34 tempers. Machines with long chips, so use sharp tools and coolant.

Typical Applications

Marine hardwareSheet metal fabricationFuel & hydraulic lines

Aluminium 5052 Available In

Aluminium 5052 is supplied from stock or to order in the product forms below. Select a product to see sizes, standards and types.

Sheets & Plates

Frequently Asked Questions

What forms of Aluminium 5052 do you supply?
We supply Aluminium 5052 as round bars, sheets, plates, pipes and tubes, forged and butt weld fittings, flanges and fasteners, cut to size and heat treated on request.
What certification comes with Aluminium 5052?
Every consignment carries an EN 10204 3.1 mill test certificate checked against ASTM B211, UNS A95052. PMI and third-party inspection can be arranged.
When should I choose 5052 over 6061?
Choose 5052 for formability and corrosion resistance in sheet or tank work, and 6061 when higher strength or machining is the priority.
Is 5052 anodisable?
Yes. 5052 anodises well for protective finishes.

Related Guides

Practical guides for specifying and inspecting Aluminium 5052.

Related Grades

Compare Aluminium 5052 with other Aluminium Alloys grades, or browse the full list of grades. Material can be cut to size, heat treated and machined.

Specification

StandardASTM B211
UNSA95052
FamilyAluminium Alloys
CertificationEN 10204 3.1
Supplied ByJPS Metal & Alloys

Get a quote for Aluminium 5052: form, size and quantity.

Request a Quote →